Lattice comes in 4’ x 8’ sheets.  It is cut in the shop to accommodate the selected fence style. 

1. After completing the installation of the rails and pickets, place your lattice panel in between the posts and parallel to the top rail.
2. Run a pencil along the edge of the post across the lattice. 
3. Cut the lattice at the marks with a skilsaw. 
4. Insert the lattice into the bottom rail.
5. Much like installing pickets, insert one end of the top rail into the post and slowly bring the rail down, inserting the lattice into the rail slot.  

© 2018 The American Fence Company. All rights reserved. Permission granted to reproduce for personal and educational use only. Commercial use, copying or distribution is prohibited without express written permission from The American Fence Company.

© 2024 The American Fence Company. All rights reserved. Permission granted to reproduce for personal and educational use only. Commercial use, copying or distribution is prohibited without express written permission from The American Fence Company.